Box Sample Drying Furnace Of Powder Coating Line For Make Sample
Technical specification
Sample oven dimensions: L4500*W2600*H2200 (mm) external dimensions
Furnace plate: made of machine-made plywood, with tongue-and-groove plug-in type and single side door. The inner plate is made of T0.8mm galvanized sheet, the outer plate is made of T0.8mm galvanized sheet, and the supporting reinforcement ribs are made of 3# angle steel.
The furnace's interior corner is constructed with T1.2mm galvanized steel sheets. Both the decorative panel and cabinet body are built with pull-through screw fasteners, ensuring excellent thermal insulation while allowing easy disassembly and maintaining an aesthetically pleasing appearance.
Roof corner: The makeup board is made of T2.0mm galvanized sheet, and the makeup board and room body are all made of pull screw structure, which is easy to disassemble and assemble and has an aesthetic appearance.
Roasting oven base plate: The oven is designed to be 200mm above the ground, with a machine-made plywood base to prevent floor cracking caused by temperature leakage and energy waste.
Furnace temperature: Adjustable from room temperature to 220℃ with constant temperature control. Temperature uniformity is ±5℃.
The heating period should be ±15 minutes from the start to the end of the baking process (the duration may vary depending on the product thickness and powder specifications, with additional calculation required).
Double furnace door
1. Constructed with 2.0T galvanized steel plates reinforced by welding.
2. The furnace body and furnace door are welded with a 100mm door column.
3. The furnace door latch is made by using the car door lock method, which has an attractive appearance.
4. One-sided door opening of the oven.
Rail: Constructed with 50mm angle iron and square steel tubes, supported by 50mm square steel tubes
Shelf: Made by welding square tubes 50*50
Wheels: Use special wheels
2 sets of frame (L4000*D1900*H2000mm)
B requires a 300,000 kcal gas burner B requires a 300,000 kcal gas burner
1. Mount the heating system on the top of the curing oven
1). Combustion chamber dimensions: L2000mm*W1200mm*H1200mm; exterior powder spraying and drying treatment
2). Combustion Chamber: The furnace plate is made of folded plates with a thickness of 100mm, filled with 100K Xisil rock wool and aluminum silicate wool. Both the decorative panel and chamber body are screw-secured, ensuring easy assembly/disassembly and an aesthetically pleasing appearance.
3). Combustion chamber inner panel: 304# stainless steel plate (1.5t), seamless welded structure, durable to prevent deformation at high temperatures;
4). Combustion chamber flange: 1.5-ton galvanized steel plate with reinforced bending treatment and seamless welding
5). Powder coating and curing treatment on combustion chamber exterior
Product Tags:
|
|
Powder Coating Oven with 220℃ Maximum Temperature PLC+HIM Automatic Control and Galvanized Steel Construction Images
|
